Azért megnézhetné valaki.
DVD-re kiírva legacyn bootolható.
Pendrájra kell egy Ext4-es partíció és erre átvonszoljuk a komplett linux mappát a felmountolt iso-ból. Ezután sudo chmod 777 a pendrájv UUID-jére, majd elnavigálunk a /linux/boot mappába és ./bootist.sh , ezután bootolható a pendrájv. Bootoláskor a sárga kép megjelenésekor tab billentyűt nyomunk és a sor végére beírhatók a cheat kódok:
Running Slax from memory
There may be situations though when you need to unplug the boot device as soon as possible while keeping Slax running. This is indeed possible; it requires your computer to load (copy) all Slax data to RAM memory during startup, so it is accessible even after your boot device is no longer plugged in. In order to put this "Copy to RAM" feature into action, make sure to start Slax with this boot option in boot menu. The time needed to start Slax will increase, since it will need to copy the entire /slax directory from CD or USB to your computer's memory, but then it will run Slax from there, letting you disconnect your boot device. Your computer will need at least 512 MB of RAM to hold all Slax data while still having enough free RAM for the operating system itself. Remember that even if you run Slax from memory, you have to properly shut it down when needed in order to safely unmount your hard drives (if any).
Cheatcodes for Slax
Boot parameters (also known as cheatcodes) are used to affect the boot process of Slax. Some of them are common for all Linuxes, others are specific for Slax only. You can use them to disable desired kind of hardware detection, to start Slax from hard drive, etc. To use cheatcodes, press Esc key to activate boot menu during Slax startup as usual, and when you see the boot menu, press Tab. A command line will appear at the bottom of the screen, which you can edit or add new boot parameters at the end:
Cheatcode Meaning Example
from= Load Slax data from specified directory from=/slax7/
or even from an ISO file from=/Downloads/slax.iso
from=
http://domain.com/slax.iso
nosound Mute sound on startup nosound
toram Activate Copy to RAM feature slax.flags=toram
perch Activate Persistent Changes feature slax.flags=toram,perch
text Disable starting of X and stay in textmode console only text
debug Enable Slax startup debugging debug
Separate commands by space. See manual pages man bootparam for more cheatcodes common for all Linuxes.
Nekem most épp pendrájvról persistens módban megy.